How to use the car's sealing strip?

We all know how to use automobile sliding window sealing strips. Common windows will appear when they are in use, and the sealing is not tight, and dust is easy to enter. Therefore, the window sealing strip is produced. Its main function is to block dust. How to use the window sealing strip? Let's take a look with the automobile aluminum alloy sliding window manufacturer!

1. The role of window sealing strips

The main functions are dust-proof, insect-proof, waterproof, sound-proof, sealing, etc. The plastic-steel door and window sealing strips on the market are generally extruded from PVC, modified PVC, EPDM, elastomer sealing strips (including TPV, TPE, TPR, SEBS), silicone and other materials, which have good waterproof and sealing functions. It also has the functions of sound insulation, antifreeze, and warmth. Plastic-steel door and window sealing strips have good elasticity, strong expansion and contraction ability, high temperature resistance, and long service life.

It must have strong tensile strength, good elasticity, and better temperature resistance and aging resistance.

2. How to use window sealing strip

Window sealing tape plays an important role in waterproofing, sealing and energy saving in plastic steel doors and windows and broken aluminum doors and windows. It is soundproof, dustproof, antifreeze and warm. In order to ensure the fastening of the rubber strip and the profile, the cross-sectional structure size of the rubber strip must match the plastic steel door and window profile.

a. Glass cushion strips and end-stop rubber strips: (window frames, window sashes) should be cleaned after welding the rubber strips in the correct direction in the correct direction. Use special rollers to push the rubber strips into the profile slot with a little force, and at the same time push the rubber strips The head is pressed down until it is inserted into the slot of the profile. Since the rubber strip is an elastic body, it may shrink after being rolled. The correct method is: when the rubber strip is installed at the two ends of the joint, retract the two ends of the rubber strip to the middle a little bit, and leave 2- 3cm shrinkage allowance, then cut into the notch

b. Glass bead: Manually insert the tip of the rubber strip into the profile groove according to the correct surface, and then press the exposed surface of the rubber strip to press the rubber strip into the gap between the glass and the profile. The rubber strips at both ends are retracted a bit toward the middle, leaving a length of 1-2 cm, then cut off, and press into the notch.

I believe that everyone knows how to use it after reading it. Manufacturers of automotive aluminum alloy sliding windows hope that the above information will be helpful to everyone.