Views: 77 Author: Site Editor Publish Time: 2019-05-31 Origin: Site
Rubber Seal strip has been applied to various industries such as automobiles, doors and windows, cabinets, refrigerators, containers, etc. According to the requirements of different industries, it has developed unique automotive seals, mechanical seals, door and window seals and other products.
However, many people still don't know much about it. Let's introduce the function of sealing strip and installation method for automobile and window.
Automotive sealing strips are mainly used for sealing, shock absorption and decoration. Specifically, the automobile seal can effectively prevent harmful substances such as wind and rain from entering the vehicle, reduce the vibration generated by the car in the door, window, etc. to maintain the ride comfort and cleanness in the car, and The working environment of the sealing part or device is improved and the working life is extended.
There some methods provided for you:
a. Paste the front cover position, use large D-type sealing strip and small D-type sealing strip.
b. Paste the position around the door, use large D-type sealing strip and P-type sealing strip.
c. Paste the position of the B-pillar of the car, use a large D-type sealing strip or a small D-type sealing strip.
d. Paste the trunk position with a large D-type seal or a small D-type seal.
e. Precautions: Ensure that the parts to be pasted are clean (no dust) and dry (no water marks) before pasting. Try not to rain after the pressure is applied for the first 3 days, and do not re-close the door to prevent the adhesive from falling off.
Window seals are mainly used in plastic doors and windows, aluminum alloy doors and windows, wooden doors and windows and other architectural decorative doors and windows. In order to install the window tightly and avoid leakage of water, the window sealing strip is usually installed, which can be dustproof, waterproof and soundproof.
Sealing strip installation:
a. Glass mat and stopper strip: (window frame or sash) should be used to push the strip in the correct direction along the surface with a special roller to push the strip a little force into the profile slot, and at the same time, the head is pressed down into the slot of the embedded profile. Since the strip is an elastomer, after rolling, there may be retraction. The correct method is to retract the ends of the strip to the middle when the strip is installed at the joints at both ends, leave 2- 3 cm shrinkage allowance, then cut into the notch.
b. Glass bead: The strip is inserted into the profile groove by hand according to the correct surface, and then the strip is pressed into the gap between the glass and the profile by pressing the exposed surface of the strip. The strips at both ends are retracted to the middle, leaving a length of 1-2 cm, then cutting and pressing into the notch.