Views:1 Author:excavator window glass Publish Time: 2021-06-15 Origin:Site
Glass is like the eyes of a car, determining the safety of the car going forward. If the glass cannot be maintained immediately, it will cause all kinds of troubles to the car owner. Some car owners only pay attention to the maintenance of some large parts during vehicle maintenance, but it is easy to forget the glass in front of them. If the car owner cleans the glass cleanly , It will also bring vitality to your own driving. With a broad vision and a bright mirror, the driving mood will be better. Today I will tell you about car glass maintenance!
Make the field of vision more open and maintain the car glass method big analysis
The car windshield glass can determine whether the driver’s vision is clear or not. In summer and winter, due to the complicated weather conditions, the windshield glass is prone to mirror blur or chaotic reflections. It is easy for the driver to drive at night or in bad weather. Line of sight affects driving safety. When there is a lot of rain in summer, there will be a lot of shellac like flying insects or traces left by rain on the glass surface. In winter, some rain and snow can easily cause frost on the mirror surface. These problems seem simple, but It is not simple to deal with.
1. Reasonable use of glass water
There are many types of glass water sold in the domestic market, but they are mainly divided into three types: summer glass water, winter antifreeze glass water and special effect antifreeze glass water. Among them, the glass water used in summer is mainly used to remove the insect residues on the mirror; the winter antifreeze glass water is mainly to ensure that when the temperature is lower than minus 20℃, the automobile parts will not be damaged; It is mainly used in particularly cold areas in the north to ensure that the car does not freeze even at minus 40°C.
In the usual glass maintenance process, we have to choose the appropriate glass water according to the specific conditions of the season and weather. When we find that the surface of the windshield glass is blurred, it will be brighter if we clean it with a suitable glass water. If you find the problem of chaotic light reflection on the glass at night, you can also wipe it with glass water. In addition, in high-speed running or dusty conditions, the glass water will be used very quickly, so be careful to inject new glass water immediately.
Community Verified icon
Some car owners think that cleaning the glass is just a matter of cleaning and decontamination, so they use washing powder or detergent instead of glass water. Some car owners are cheaper and directly use clean water instead. These have hidden dangers. There are some deposits in chemical detergents such as washing powder, which will easily corrode the rubber tube over time, and will block the spray nozzle, and in severe cases will damage the motor. The general detergent will also continue to corrode the rubber tube and accelerate the hardening of the catalyzed wiper rubber strip. When the hardened rubber strip scratches the windshield, it will accelerate the surface of the windshield to be shaved and scratched. If the wiper is replaced again, the cost will be dozens of times the price of glass water. Although ordinary clean water is very clean, there are many chemical residues in it, and the accumulation of time will also cause the clogging of the spray nozzle and affect the spraying. Long-term use will also increase the friction of the mirror surface, which will easily leave slight scratches on the mirror surface when the wiper is cleaned.
2. The thing about car stickers
In summer, a thin layer of insulation film can play a big role, not only to withstand the hot sun, but also to insulate and prevent ultraviolet rays. Industry insiders pointed out that the heat insulation effect is one of the important reasons for consumers to choose the film. In addition, the light transmittance and UV index of the heat insulation film are all things consumers must be concerned about. However, many consumers have many misunderstandings about the purchase of insulation film.
Car insulation films are divided into front and rear windshield films and side windshield films. Among them, the front windshield has the highest requirements for the heat insulation film. According to the traffic safety regulations of the Ministry of Public Security, the light transmittance of the front windshield must be greater than 70%, provided that it does not affect driving safety.
The front windshield is most taboo to stick dark-colored insulation film. In addition, when choosing the UV index of the heat insulation film, the higher the better, because it can protect the center console components and prevent premature aging by long-term sun exposure.
For the side windshield insulation film, the premise is also that it does not affect the owner's observation of the rearview mirror. The optional insulation film for the side windshield is more flexible and the color is also more variable. If some car owners prefer blue tint to the sunscreen, etc.
In addition, the thermal insulation effect of the thermal insulation film has no direct relationship with the color depth, and the coating process in the thermal insulation film is the key factor that determines the thermal insulation effect. The higher the heat insulation rate, the more reflective the light will be. Generally speaking, the insulation film with an insulation rate of 60% on the market is already a good product. If the product itself claims to have an insulation rate of up to 80% or even 90%, consumers will have an extra attention.
If the car is equipped with a GPS navigator, the car owner should choose non-metal film products, because most of the explosion-proof films on the market are still metal films, which will indeed cause interference to GPS signals.
In addition, there is also a simple process for filming: spread a towel on the instrument to keep it tidy-clean the glass-cut the film-shape the heat insulation film on the outer glass of the car window-according to the glass shape, cut the corners-clean the inner glass-formal Paste the film-roll out the water, blow the corners with a blower-finally clean. These steps are indispensable. If the effect of the film is not good, the car owner can ask the shop to rework, so that the car glass can be best protected.
3. Cover glass insurance for your car
Separate glass breakage insurance, that is, the insurance company is responsible for compensating for the loss of the vehicle's separate glass breakage during the use of the insured vehicle. The broken glass alone means that only the windshield and window glass (not including the lights and mirror glass) of the insured vehicle are damaged.
In addition, if you insure at the rate of imported glass, the insurance company will compensate at the price of imported glass; if you choose to insure at the rate of domestic glass, the insurance company will compensate at the price of domestic glass. Buying glass insurance for your car can effectively ensure the safety of the glass, and the owner can drive with confidence.